Currency KZT
Partial repair of an element. order in Shymkent
Order Partial repair of an element.
Partial repair of an element.

Partial repair of an element.

Reconfirm the price with seller
Seller
Kazakhstan, Shymkent
(View map)
Description
Partial repair of an element. Quickly and without trace.

PARTIAL REPAIR OF THE ELEMENT. QUICKLY AND WITHOUT TRACE.

The technology of so-called "dot repair" when a repair zone does not exceed on the area the A4 format size (a standard format of writing paper), an izvetsn and is widely applied by masters already for a long time. Moreover, even among experts of competitive brands R - M - ovskaya the technology of carrying out these works won reputation of one of the most successful.


- colors with the high content of aluminum grain, similar silvery and golden;
- colors with a large amount of biconvex aluminum (BC 171 type);
- the colors containing "ultra-violet titan" grain (more and more fashionable today). Fig. 2. (zone No. 2,3)

There is no need for any specific equipment for this type of repair. All types of kraskoraspylitel are suitable for it. Use of infrared drying installation allows to optimize time of carrying out repair.
Preparation.
The soil spot (zone No. 1) is ground by P44 paper on dry or P1500 on wet the Next zone (No. 2-about 5-10 cm from soil) is ground by P800-1000 on dry or P1500 on wet. All other element (zone No. 3) is processed by polishing Fine Bril paste. All element is degreased by means of PK700.


Basic DIAMONT 100 paint gr.
DIAMONT BLENDER 100 gr.
BC101 * - the proofreader of an ottnek 10-15gr.
BC 020 50gr.

* Addition Vs101neobkhodimo for silvery and golden hypostases of a metallic, and also for those flowers which part more than 75% of grain are.


1. 2-3 full layers of the prepared mix are applied on a repair zone (a zone No. 1 - a soil spot)
Comment: for the prevention of danger of emergence of "regional effect" on soil the first layer can be thin.
At the same time it is necessary to remember full coloring of a spot of soil, the mix which is filled in in the gun much less "ukryvist" in comparison with basic DIAMONT paint.

2. For acceleration of drying of a layer it is possible to use a stream of compressed air from the painting gun. The air stream at the same time has to be directed along the painted element.

4. To border of zones No. 2 and No. 3 put the first varnish coat
Cover with the second layer a full element
In case repair demands performance of transition on a varnish, then on a zone of a napyl from the second varnish coat the gun prepared in advance right after drawing apply 1-2 thin films of the new special BLENDING TOP solvent.
In case of need after drying the zone of drawing BLENDING TOP can be slightly polished manually (literally 2-3 movements with a napkin or rags) by means of the FINE BRIL or SPECIAL BRIL polish.

Contact the seller
Partial repair of an element.
Partial repair of an element.
Compare0
ClearSelected items: 0