Currency KZT
Plasma cutting machine UPMR buy in Almaty
Buy Plasma cutting machine UPMR
Plasma cutting machine UPMR

Plasma cutting machine UPMR

Products from producer
In stock
Reconfirm the price with seller
Shipping:
Seller
Kazakhstan, Almaty
(View map)
Technical characteristics
  • BrandFMGroup
Description

Characteristics

Effective working field, mm 3000 * 1500; 3000 * 2000; 6000 * 1500; 6000 * 2000; 8000 * 2000
Repositioning accuracy, mm ±0.3
Positioning speed max, mm/min 25 000
type of drive servo drive
Metal thickness (plasma cutting) up to 80 mm
Metal thickness (gas cutting) up to 100 mm
Software licensed
Overall dimensions (L * W * H), mm 7000 * 2400 * 2000
Weight, kg 3050

Description

Precise and clean cut

The drive is protected against loss of steps and running errors. Precision precision guides, preloaded bearings, and backlash - free gearboxes ensure smooth running and high precision. Thanks to this, finished products, even complex shapes, have a minimum error.

  • Positioning accuracy: 0.1mm/m
  • Program accuracy: 0.02 mm/m
  • Automated accuracy: 0.005 mm/m

Cutting Height Control (THC)

The arc voltage TNS system monitors the surface irregularities of the metal being cut and automatically sets the required gap. This allows you to make a cut more even, clean and saves consumables.

High speed and easy operation

The control system allows you to accumulate cutting modes for various metals and reuse them. In the event of an unplanned stop, such as a power outage, the cutter can be returned to the previous frame rather than starting over.

  • Maximum free travel speed: 15 m/min

Coordinate reversal system

The installation itself determines the boundaries of the sheet of metal. If the sheet is not level, the machine automatically corrects the reference system and cuts within the sheet of metal.

Reinforced construction and protection systems

The rigidity of the frame and the portal ensure the absence of vibrations and high dynamic performance. The protective cover and the lower position of the teeth on the rack provide protection against damage from the metal sheet and eliminate the accumulation of dust.

100 mm - the maximum thickness of a sheet of metal that can be cut on a machine in this configuration. It is possible to increase the clearance of the portal under a sheet of metal with a thickness of 300 mm.

Protecting the torch from hitting the workpiece

During operation, the plasma torch may collide with a protruding part.

The protection system stops the portal in emergency mode, excluding damage, with the subsequent ability to continue cutting without damaging the workpiece.

Thermal Compensation Unit

When cutting for a long time, the portal and bed heat up. The thermal compensation unit protects against jamming and relieves stress on the bearings, thereby increasing durability.

Working field

Working field dimensions: 3000 * 1500; 3000 * 2000; 6000 * 1500; 6000 * 2000; 8000 * 2000mm

Contact the seller
Plasma cutting machine UPMR
Plasma cutting machine UPMR
Shipping method
Compare0
ClearSelected items: 0