(View map)
- BrandKazstanex
- Country of manufactureRussia
[Pneumomechanical scissors guillotine]
Scissors of the series "-ND" - with manual control of a gap between knives and the manual drive of a back emphasis. The back emphasis is intended for installation of a given size of the cut-off preparation. Scissors of a series are reliable in work, are easy-to-work, simple under repair.
Provide high precision of the cut-off preparations, details. The lubrication system and electric equipments allows their operation in the conditions of low temperatures that is impossible during the work on hydraulic scissors. In view of lack of dribble of oil as it happens during the work on hydraulic scissors, purity of a working zone of scissors is provided.
Krivoshipny sheet scissors with an inclined knife of fashions. Are intended to ND3314G for cutting of sheet material with strength of 500 MPas (50 - kgf/mm2) and the largest size of cross section 2,5kh1600mm.
Scissors find broad application in procuring shops of the enterprises of mechanical engineering, autotractor construction, aircraft industry, agricultural mechanical engineering and other industries.
| Technical characteristics: | |
| Name of parameters | Data |
| The largest sizes of the cut metal with a temporary resistance of 500 MPas (50 -¬úß/mm 2), mm: | |
| thickness | 2,5 |
| width | 1600 |
| - | - |
| Frequency of the courses of a knife, mines – 1: | 65 |
| single | 34 |
| when cutting the largest sizes of the cut metal | - |
| Tilt angle of a mobile knife | 1 °-20 ’- |
| - | - |
| The greatest length of the cut-off strip during the work with a back emphasis, mm | 700 |
| Overall dimensions of scissors in the plan, mm: at the left – to the right, in front – back (without lateral emphasis), height of scissors | 2300х1570х1470 |
| Height over floor level from the top edge of a motionless knife, mm | 800 |
| Mass of scissors, kg | 2000 |
| Consumption of compressed air for one inclusion, l | 0,25 |
| Sort of current of a power line | Variable three-phase |
| Frequency of current, Hz | 50 |
| Tension, In | 380 |
| Number of electric motors | 1 |
| Sort of current of the electric drive of scissors | Variable three-phase |
| Tension of a power chain, In | 24 |
| Tension of a chain of management, In | 24 |
| Tension of a chain of lighting of the line of a cut, In | 24 |
| Quantity of points of lighting | 3 |
| Operating mode of the electric drive of scissors | Single and continuous courses, jog, manual pro-collar |
| Electric motor of the main drive: | - |
| type | 4AMC100S4U3 |
| power, kW | 3,2 |
| frequency of rotation, min. – 1 | 1395 |
-
| Technical characteristics: | |
| Name of parameters | Data |
| The largest sizes of the cut metal with a temporary resistance of 500 MPas (50 -¬úß/mm 2), mm: | |
| thickness | 2,5 |
| width | 1600 |
| - | - |
| Frequency of the courses of a knife, mines – 1: | 65 |
| single | 34 |
| when cutting the largest sizes of the cut metal | - |
| Tilt angle of a mobile knife | 1 °-20 ’- |
| - | - |
| The greatest length of the cut-off strip during the work with a back emphasis, mm | 700 |
| Overall dimensions of scissors in the plan, mm: at the left – to the right, in front – back (without lateral emphasis), height of scissors | 2300х1570х1470 |
| Height over floor level from the top edge of a motionless knife, mm | 800 |
| Mass of scissors, kg | 2000 |
| Consumption of compressed air for one inclusion, l | 0,25 |
| Sort of current of a power line | Variable three-phase |
| Frequency of current, Hz | 50 |
| Tension, In | 380 |
| Number of electric motors | 1 |
| Sort of current of the electric drive of scissors | Variable three-phase |
| Tension of a power chain, In | 24 |
| Tension of a chain of management, In | 24 |
| Tension of a chain of lighting of the line of a cut, In | 24 |
| Quantity of points of lighting | 3 |
| Operating mode of the electric drive of scissors | Single and continuous courses, jog, manual pro-collar |
| Electric motor of the main drive: | - |
| type | 4AMC100S4U3 |
| power, kW | 3,2 |
| frequency of rotation, min. – 1 | 1395 |
-
