Polyurethane component systems for self-casting Elastoplast

Two - component system prepolymer - hardener, EP SKU PT - 74 TU 2294 - 005 - 24064306 - 2012
Polyurethane is a modern construction material, which, due to its special performance properties, is used as a replacement for various brands of rubber, rubber, metal, plastic in the mining, metallurgical, oil and gas industries and in many other industries.
Polyurethane is characterized by high physical and mechanical properties:
- low residual deformation,
- elasticity,
- wide range of hardnesses,
- low abrasion,
- high tensile strength,
- high resistance to tear and deformation,
- oil and petrol resistance, acid resistance,
- temperature range from - 50°С to + 90°С.
Polyurethane composition Elastoplast is a two - component system - prepolymer and hardener.
Prepolymer - urethane prepolymer EP SKU PT - 74 based on polyether (Manufacturer - Mitsubishi Chemical Corporation) and toluene diisocyanate (Manufacturer - Bayer International CA)
Designed for the production of high quality castable hot curing elastomers.
The hardener is a solution of an aromatic diamine in a polyol.
Depending on the composition, compositions are made in 6 grades in the range of hardness from 55 Shore A to 75 units. by Shore D
The main advantage of our formulations is that you only need different hardeners for the required hardness and the prepolymer always remains the same.
To clarify the physical and mechanical properties of the composition, send a request.
Attached is a quality certificate and a cover letter with mixing and pouring technology.
Order a trial batch from 5 kg.