Press hydraulic measuring PGI-500-01S and PGI-1000S
- Customer pickup,
- Courier
- In detail
- Country of manufactureRussia
Press hydraulic measuring PGI - 500 - 01S and PGI - 1000S
The press are intended for formation and test for durability at compression of samples of asphalt concrete and other road - building materials in vitro.
The press are equipped with the adjustable electrohydraulic drive of the support plate with the sensor of linear movements (the developed effort is measured by the special sensor), and the control panel operating modes with digital indication of parameters of tests.
By means of a press the following operations can be performed:
• test for durability at compression of cylindrical samples from o 50,5mm asphalt concrete. ; o 71,4mm. ; mm o 101.;
• test for durability at compression in accordance with GOST 10108 samples - cubes with an edge to 10 cm from a tsementobeton;
• test for durability in accordance with GOST 8462 bricks.
Technical characteristics:
| Model | PGI - 500 - 01S | PGI - 1000S |
| The measured effort (the main range), kN | from 50 to 500 | from 50 to 1000 |
| The measured effort (additional range), kN | from 5 to 50 | - - - - - - - - - - |
| Size of working space, not less, than a mm | 195х195х295 | 225х250х320 |
| Size of movement of a lifting plate, not less, than a mm | 45 | 45 |
| Speed of the course of a lifting plate (adjustable), mm/min. | from 1 to 10 | from 0.5 to 5.0 |
| Mass of a press, kg | 100 | 130 |
| Mass of pump station, kg | 50 | 50 |
| Overall dimensions of the executive block, mm, no more | 460х325х1000 | 520х400х1200 |
| Overall dimensions of pump station, mm, no more | 235х350х600 | 235х350х600 |
