(View map)
- BrandSTALEX
- Country of manufactureRussia
[max. O drilling in steel of 63 mm in cast iron of 80 mm, kW 7,5]
Radial-drilling machines 2A554 - 1 - can be used for drilling, drilling, a coredrilling and cutting of carvings.
Configuration of machines traditional for radial-drilling machines also includes:
· - The column turning around a vertical axis on bearings of a socle 2A554 - 1.
· - A sleeve with a possibility of vertical movement on a column and with a possibility of rotation around a vertical axis together with a column.
· - A drilling head with a possibility of horizontal movement on sleeve guides.
· - The spindle mounted in a cylindrical sleeve with a possibility of vertical movement in the case of a drilling head.
Giving is provided with a spindle sleeve. All other movements — - positioning. All parts of machines move with the minimum effort and are fixed in working situation by means of hydraulic clips. All governing bodies are concentrated on the control panel of a drilling head. The preliminary set of frequency of rotation and giving of a spindle, and also hydraulic management of boxes of speeds and giving provides fast change of the modes.
The frictional coupling which is built in a box of speeds provides a fast reverse when cutting carvings and protects a box of speeds from overloads. The spindle of the machine is counterbalanced in any point of its movement. The Shturvalny control unit a drilling head has a possibility of switching off of mechanical giving at achievement of the set drilling depth.
The standard tension of an electric network — - 380B, 50 Hz. For an additional fee installation of electrical accessories for other values of tension of a network is possible.
| Technical characteristics: | |
| Diameter of drilling in steel, mm | 63 |
| Diameter of drilling in cast iron, mm | 80 |
| Torque of a spindle, nanometer | 800 |
| Axial effort on a spindle, N | 22000 |
| Power of the main engine, kW | 7,5 |
| Axial movement of a spindle, mm | 400 |
| Movement of a head on a sleeve, mm | 1225 |
| Movement of a sleeve on a column, mm | 750 |
| Rotation of a sleeve around a column, grd | 360 |
| Frequency of rotation of a spindle, rpm | 18 —-2000 |
| Number of frequencies of rotation of a spindle | 24 |
| Giving of a spindle on a turn, mm / about | 0,045 —-5,0 |
| Giving of a spindle in a minute, mm/min. | —- |
| Number of giving of a spindle | 24 |
| Spindle cone | MK5 |
| Length, mm | 2665 |
| Width, mm | 1030 |
| Height, mm | 3500 |
| Weight, kg | 4800 |
-
| Technical characteristics: | |
| Diameter of drilling in steel, mm | 63 |
| Diameter of drilling in cast iron, mm | 80 |
| Torque of a spindle, nanometer | 800 |
| Axial effort on a spindle, N | 22000 |
| Power of the main engine, kW | 7,5 |
| Axial movement of a spindle, mm | 400 |
| Movement of a head on a sleeve, mm | 1225 |
| Movement of a sleeve on a column, mm | 750 |
| Rotation of a sleeve around a column, grd | 360 |
| Frequency of rotation of a spindle, rpm | 18 —-2000 |
| Number of frequencies of rotation of a spindle | 24 |
| Giving of a spindle on a turn, mm / about | 0,045 —-5,0 |
| Giving of a spindle in a minute, mm/min. | —- |
| Number of giving of a spindle | 24 |
| Spindle cone | MK5 |
| Length, mm | 2665 |
| Width, mm | 1030 |
| Height, mm | 3500 |
| Weight, kg | 4800 |
-
