- Country of manufactureSweden
Ring saws of Bahco are a new quality standard, accuracy, durability and universality. At their design each characteristic was optimized. Ring bimetallic saws of SANDFLEX® Perfectly work on the majority of materials, such as, ferrous and non - ferrous metals, became also alloys, plastic wood. All cloths of ring saws are made of a bimetallic cloth of SANDFLEX® (on a tape to a basis from spring and spring steel it is welded a pro - wolf from Matrix quick cutting steel). Tooth is milled. Application of a variable step 4/6 TPI (teeths) considerably decreases by inch vibration and shock loadings. Use of high - quality quick cutting steel, on the cutting tooth edge, provides approximately twice the bigger term of operation in comparison with the next analogs. All cloths of ring saws are made of a bimetallic cloth of SANDFLEX with teeths from the high - alloyed Matrix (7P1M5K5) quick cutting steel. - Are intended for cutting of ferrous, non - ferrous metals, staly and alloys, wood and wood materials, plastic and polymeric materials. - Ring saws are made for a pileniye of openings with a diameter from 14 to 210 mm. - the Maximum depth of a pileniye of 38 mm - the Step variable tooth of 4/6 teeths on the inch providing more exact pro - saws at smaller vibration even when cutting of difficult processed materials. - the Forward corner positive — 6 ° - the Special profile of tooth provides bystry incision in preparation, and technological openings for carrying out of shaving and special distributing allow to delete more effectively shaving and the cut part of preparation. - Ring saws with a diameter of 168 mm and 210 mm are made with a constant step of 6 teeths on inch — the maximum depth of a cut of 38 mm; on diameter of 177 mm depth of a cut of 50 mm is applied 4/6. Ring saws with hard - alloy napayka of Bahco Carbide (ST) Ring saws are developed for production of pure, exact openings in difficult processed and abrasive materials such as: foam concrete, a brick a ceramic tile, a laminate, plywood, the reinforced plastic, composites and in other abrasive nonmetallic materials. In ring saws of Bahco Carbide tooth is created from solid alloy which is sealed in a cloth and the special profile of tooth with 4TPI step is formed. All cloths of ring saws are made of the material D6A (steel 45khgmnfa), tooth is created from a hard - alloy plate. - Ring saws with hard - alloy napayka (Art. ) perfectly saw in any material from a brick and — - a ceramic tile to layered plastics, fiber glass and strong breeds of a tree. - Ring saws are made for a pileniye of openings with a diameter from 14 to 152 mm. - the Maximum depth of a pileniye of 38 mm - a tooth Step constant 4 teeth on inch. - the Forward corner positive - 6 Tops of tooth consist of hard - alloy material which is welded on a saw cloth. Then the special profile of tooth is formed.