Ring-toothed roller KKZ-10-02 (510mm), semi-trailer
- Customer pickup,
- In detail
- BrandЗавод Автотехнологий
- Country of manufactureRussia
- Type agricultural rollerTrailer
- Type work surfaceRing-toothed
- Working width10 m
The ring - toothed roller KKZ - 10 - 02 (510 mm), semi - trailer, is designed for crushing clods, destroying the soil crust, rolling the soil, compacting to a depth of up to 7 cm of the subsurface and loosening to a depth of 4 cm of the surface soil layers. After rolling, the surface of the field is covered with a mulch layer of soil, which helps to retain moisture.
Pre - sowing rolling is carried out to retain moisture in the soil, crush large clods of earth and level the surface of the field, as well as to compact the soil, which is especially necessary before sowing crops.
This operation reduces slippage and loading of the support - drive wheels of the seeder, which increases the uniformity of sowing and stabilizes the seed placement depth. Post - sowing rolling is a necessary operation for moisture retention and ensuring the contact of seeds with the soil.
Such contact creates favorable conditions for obtaining earlier and more friendly germination of seeds, which is essential in increasing the yield when sown in dry and wind - damaged areas. The skating rink is intended for use in all soil and climatic zones, except for the zone of mountain farming.
The working bodies of the roller are discs and toothed rings. The mutual movement of the rings relative to the disks allows the roller sections to self - clean from sticking wet soil. The design of the skating rink allows its safe transportation along the roads of the general network due to the possibility of its transfer to the position of long - distance transport.
The roller is aggregated with tractors of class 1.4….2.0 equipped with a working hydraulic system. If it is necessary to carry out rolling of crops with a soil hardness of less than 0.9 MPa, it is recommended to use rollers of other brands (with a lower degree of compaction).
The roller is designed to work in such conditions:
- Soil temperature range - from 0°С to + 30 °С;
- Soil moisture in the cultivated layer - from 14% to 23% ;
- Soil hardness in the cultivated layer - no more than 0.4 MPa;
- Ridge of the soil surface (height of ridges) - no more than 80 mm;
- There should be no accumulation of crop residues on the field.
It is not recommended to use the roller on fluffy soils with a content of dusty fraction (particles up to 0.5 mm in size) of more than 20% .
|Aggregated with class tractor||3.0…5.0|
|Roller structural weight, kg (no more)||5100±1%|
|Ground clearance, mm (not less than)||450|
|Operating speed, km/h||To 10|
|Transport speed, no more than, km/h||ten|
|Roller dimensions in working position, mm
|Roller dimensions in transport position, mm
|Capture width in working position, not less than, m||9.8|
|Productivity for 1 hour of main time, ha/h||At least 10|
|Number of sections, pcs||5|
|Width of working sections (large), not less than, mm||1960|
|Number of discs, pcs / weight of 1 pc, kg||75∅470 | 25.3|
|Number of gear rings, pcs/weight 1 pc, kg||70∅480 | 11.6|
|Soil compaction, g/cm2||Up to 1.2|
|Soil crumbling, %||85|
|Size of soil clods, cm||2…. . four|
Packers from 6m to 10m
WE DELIVER GOODS ALL OVER RUSSIA AT FAVORABLE PRICES AND IN THE SHORTEST TIME
This offer does not constitute a public offer.
AND ALSO AVAILABLE A LARGE SELECTION OF AGRICULTURAL EQUIPMENT WITH GOOD PRICES FOR YOU! ! !
All information and photos of products on the site are for informational purposes only. The cost of goods, prices and other information indicated on this site is provided as a reference and is not a public offer, determined by the provisions of Article 437 of the Civil Code of the Russian Federation and can be changed at any time without notice at the discretion of the seller. For detailed information about the cost, terms and conditions of delivery, please contact our company at the specified numbers. Colors and models of goods sold may differ from those presented on this website. Specifications and packaging of goods may be changed by the manufacturer or the manufacturer without notice.