Roofing material Rizolin FSA
- Customer pickup,
- Courier
- In detail
- BrandРизолин
- ManufacturerРИЗОЛИН
- Country of manufactureKazakhstan
| Description:
What is "Rizolin FSA"? It is the material for roofing works possessing a self-adhesive layer with a covering from bitumen and polymers. The outer side of material possesses the waterproofing layer from aluminum foil. Internal structure of material - the strengthened fabric from fiber glass interfering deformation when rendering mechanical impact on "Rizolin". Material is delivered in the form of rolls. |
To send the application
Scope:
It is applied in the following cases:
- When laying soft roofs, and also the flat roofs mounted on the reinforced concrete basis;
- At repair of the roofs of cattle type having a roofing covering from slate or a professional flooring;
- During creation of a waterproofing of pipes of hot water supply. Also, perfectly is suitable for protection against hot steam;
- When carrying out warm and sound-proof works in air shafts of both rectangular, and cylindrical section.
Than Rizolin is good "FSA"?
Material possesses a number of outstanding features. Let's list some of them:
- "Rizolin" is easily pasted to any surface;
- Installation of material is elementary - enough only two workers and one hour of time to repair a surface the area of 100 sq.m;
- "Rizolin" is perfectly attached even to an uneven surface;
- Aluminum foil reflects all UF-waves getting on material. The result - service life of "Rizolin" makes not less than 25 years!
- Material is fireproof.
The main - "Rizolin" allows to reduce the volume of the used roof not less, than by 30%!
Table of characteristics of material:
| Name of an indicator | Requirements of the standard |
| Thickness | 2,5 + 0,15 mm |
| Length/width | 10/1 m |
| Explosive force at stretching, not less | 890 N |
| Conditional durability at a gap, not less | 12,0(120) MPa (kgf/cm ²) |
| Relative lengthening at a gap, not less | 15% |
| Flexibility on a bar of 25±0,2 mm at a temperature, not above | - 25 ºС |
| Heat resistance during 2 h at a temperature, not below | 60 ºС |
| Water absorption on weight at test during 24 h, no more | 1% |
| Water tightness within 72 hours with a pressure | 0,001mpa (0,01 kgfs/cm ²)
it is waterproof |
| Adhesive durability, not less
- from a steel surface - from a concrete surface - from a wooden surface |
1,5 kN/m (kgf/cm) 1,0 kN/m (kgf/cm) 0,5 kN/m (kgf/cm) |
| Vapor impermeability, not less | 20 m ² x h x Pa/mg |
| The reinforcing basis | fiber glass fabric |
| Foil thickness | 30 microns |
| The top layer - aluminum foil (30 microns), from below - an anti-adhesive film. | |
Keeps within at a temperature of air of +15 °C. At lower temperatures the stacked material needs to be warmed up slightly, for the best pasting with a surface.