Scales automobile portable podkladny RW-15P

. Figurative podkladny automobile scales of the RW - 10(15)P type are intended for on - automobile weighing of vehicles with the maximum quantity of axes to three (picking of RW - x - 6P). In picking (RW - x - 2P) can be used for weight control of load of the axis, non - commercial accounting of different materials, control of movement of transport through check point zones.

. . . The wearproof weight platform from cast aluminum, bevels from tough rubber and sensors from stainless steel are capable to make weighing of the car with axial loading to 30 t. Weight platforms have the high class of protection IP65 that allows to operate scales in the most severe conditions.
. . . The mass of the car is determined by load of each wheel with the subsequent summing.

. . . The set of scales is established on the prepared site in 30 min. Thanks to small weight, scales can be established without use of load - lifting devices by one person.

. . . The set from two weight platforms is applied to on - axis weighing. When weighing it is necessary to make consecutive installation of each axis of the vehicle on weight platforms. For increase of accuracy of weighing it is recommended to use the optsiolnalny set of passive platforms. Optionally it is possible to connect to one weight measuring RW2601P device to 6 - ti additional weight platforms.

Features of the design

• Consolidation to 6 platforms in one system
• Class of protection of the IP 54 indicator
• Class of protection of GPU IP 65
• Additional protection of cable input
• The easily readable liquid crystal display with illumination
• The built - in chekopechatayushchy printer with function of determination of total weight of the car
• The food from the network via the adapter or from the built - in accumulator

Options

• Radio - frequency identification
• The extended cable (to 50 m)
• Contact with the PC or portable board on the radio channel
• Additional weight platforms (to 4 pieces)
• Software (statics)
• Set of passive platforms

Standard set of delivery

• The weight RW - P platform - 2 pieces.
• The weight RW - 2601P indicator - 1 piece.
• Entrance ramps - 4 pieces.
• Set of passive platforms (by delivery of RW - 10(15) - 2P
• Set of cables - 2×10 m.