- BrandFirestone Building Products
- Country of manufactureUnited States
- PurposeFor roofing
Self-adhesive tape for seams of QuickSeam Splice Tape
1. Description
The tape for seams of QuickSeam Splice Tape 76 mm wide (3") and 152 mm (6") productions Firestone is intended for connection of the sheets EPDM of a membrane RubberGard directly on object.
2. Preparation
Preparation of surfaces of EPDM of a membrane of RubberGard has to be made by QuickPrime Plus primer by means of the QuickScrubber or QuickScrubber Plus grater. Use for these purposes of any other materials is not allowed. In case of long storage of a tape at temperatures below 15 °C it is necessary to give it the chance to get warm to room temperature just before use.
3. Drawing
The tape 76 mm wide (3") is used for performance of standard seams without mechanical fastening of a membrane in a seam. The tape 152 mm wide (6") is used for performance of seams with mechanical fastening of a membrane in a seam. Concrete instructions on laying are provided in the installation guide published by the Firestone company.
4. Consumption rate
Depending on length of a concrete seam. At the termination of a roll performance of an overlap not less than 25 mm in size is necessary (1").
5. Note:
In each cardboard box there are graters with QuickScrubber and/or QuickScrubber Plus handles. Their quantity depends on the concrete material QuickSeam. Storage: To store in the sealed factory container at a temperature from 15 °C to 25 °C. Not to allow hit of a direct sunlight until readiness for use. Expiration date: 12 months on condition of storage according to the above instructions. Before use to check date of production on each roll. At influence of the increased temperatures the expiration date is reduced.
6. Precautionary measures
See. Reference guides according to safety measures during the work with the corresponding materials.