Models
Machine GP - 500VRP (3x - saw, with 2 pressure rollers, all sliding saws) - Price: 305,000 rubles.
Machine GP - 500VRP (3x - saw, with 3 pressure rollers, all sliding saws) - Price: 325,000 rubles.
Cut laser pointer 1 pc. - Price 10,000 rubles.
Blades are not included with the machine.
Blades are not included with the machine.
Slab - processing machine GP - 500VRP, three - saw, with 2 drive rollers, all sliding saws
The GP - 500 - VRP machine can also be used as an edge trimming machine (the width of the edge trimming is adjustable in the range from 80 to 250 mm).
The multifunctional slab processing machine GP - 500 - VRP (all sliding saws) is structurally equipped with 2 vertical and 1 horizontal saws. In this case, all saws are moved apart by screw pairs. The indispensability of this machine in your production is obvious. In the presence of a machine GP - 500 - VRP, highly efficient and deep processing of slab into edged boards in one operation becomes possible. The front edge knot is adjustable from 80 to 150 mm. And the horizontal saw has the ability to adjust the size according to the thickness of the board without completely stopping the motors from 16 to 50 mm. This function ensures uninterrupted operation of the machine throughout the entire shift.
Slab processing machines are designed for processing slab, which is an inevitable production waste, and, accordingly, these machines are necessary to increase the profitability of any woodworking enterprise.
The GP - 500 - VRP machine can also be used as an edge trimming machine (the width of the edge trimming is adjustable in the range from 80 to 250 mm). The board obtained as a result of processing is of high quality, has four processed sides and exactly corresponds to the specified size.
Workpiece width (slab) maximum, mm | 400 |
Workpiece thickness, maximum, mm | 250 |
Width of processed material (boards), mm
|
150 80 |
Height of processed material (board), mm
|
fifty 16 |
Length of workpiece and processed material, mm, not less than | 3000 |
Cutting speed, m/s, not less than | 75 |
Rated feed rate, m/min | 6 |
Количество пил, шт. не более | 3 |
Диаметр пил, мм
|
450 (500) 500 |
Номинальный диаметр посадочной шейки под инструмент, мм | 50 |
Номинальное расстояние от пола до рабочей поверхности, мм | 800 |
Норма обслуживания, чел. | 2 |
Масса станка, кг, не более | 540 |
Габаритные размеры, мм, не более
|
2950 1600 1600 |
Род тока питающей сети | переменный |
Номинальная частота, Гц | 50 |
Номинальное напряжение сети, В | 380 |
Редуктор червячный | NRW - 0. 75 \ 60 |
Количество электродвигателей, шт. | 4 |
Электродвигатель главного привода (пильного вала)
|
11 2880 |
Электродвигатель вертикальных пил (2шт. )
|
7, 5 2880 |
Электродвигатель привода подачи (подающих вальцов)
|
0, 55 1000 |
Суммарная мощность электродвигателей, кВт | 26, 55 |
* При диаметре пил 500 мм