Slab - processing machine GP - 630 - 3
The slab - processing machine GP - 630 is designed for processing slabs into edged boards, it operates in automatic mode without the involvement of additional personnel.
The machine is used for processing slabs and obtaining edged boards from it. Cutting edges and horizontal division of the slab is done automatically in one pass without the need for additional staff.
It is possible to install two saw blades on the spindle, which spreads the slab into boards in a horizontal position, while increasing the efficiency and speed of processing the slab.
The four - saw machine has the following advantages:
- universal design with three driven rollers guarantees reliable feeding of the slab through the machine;
- the clamping of the slab is carried out by any improvised load and securely holds the slab in the zone of trimming the edges;
- at the exit from the machine, an edged board is obtained, which has four processed sides;
- the resulting board is distinguished by high cut quality and accuracy of the specified dimensions.
Workpiece dimensions
|
100 - 450 up to 150 |
Width of processed material, mm
|
210 80 |
Height of processed material, mm
|
fifty 16 |
Length of processed material, mm
|
7000 1200 |
Cutting speed, m/s, not less than | 75 |
Rated feed rate, m/min | 4 - 6 |
Number of saws, pcs. no more | four |
Saw diameter, mm
|
500 630 |
Nominal diameter of the landing neck for the tool, mm
|
fifty 80 |
Nominal distance from the floor to the working surface, mm | 800 |
Service rate, pers. | 2 |
Overall dimensions, mm, no more
|
3000 1650 1650 |
Machine weight, kg, no more | 730 |
Type of supply current | variable |
Current frequency, Hz | fifty |
Used voltage, V | 380 |
Worm gear | NRW - 0.75 \ 60 |
Number of electric motors, pcs | four |
Horizontal saw motor
|
22 1450 |
Vertical saw motor
|
7.5 2950 |
Feed drive motor (feed rollers)
|
eleven 1000 |
Total power of electric motors, kW | 38, 1 |
* With saw blade diameter 630 mm