- Country of manufactureBelarus
DEM 124
The snowplow milling and rotor DEM 124 is intended for cleaning of pavings and other areas of snow, and also for removal
the snow shaft formed by plow snowplows, way of rejection aside or loadings in the vehicle.
Feature of this snowplow is existence of a quick-change forward hinge plate on which is established
- or a rotor snowplow with the mechanical drive from tractor VOM
- or a snow-removing dump with hydraulic turn.
On the MTZ basic tractor the back hinge plate is kept that allows to establish at the same time as well a back brush.
Installation dismantle of a rotor snowplow or dump takes no more than 5 min.
At the request of the customer the rotor snowplow of DEM 124 can be completed with GHU of own production.
The rotor snowplow is made in the following executions:
- with a vybrosny branch pipe, without a possibility of loading of the cleaned snow in a body of the car and only for ejection of the cleaned snow on a roadside;
- with a loading trench, with a possibility of loading of the cleaned snow in a body of the car or for ejection of the cleaned snow on a roadside;
- with a loading telescopic trench, with a possibility of loading of the cleaned snow in a body of the car or for ejection of the cleaned snow on a roadside;
TECHNICAL CHARACTERISTICS:
MTZ-82.1 |
MTZ-92P |
|
Engine capacity of a basic tractor, kW |
60 |
65 |
Snowplow productivity on the weight, t/h, not less |
500 |
|
Range of an otbros of bulk of snow. M not less — to the right — to the left |
20 20 |
|
Width of capture, m, not less |
2,1 |
|
Height of the cleaned snow layer, m, not less |
1,0 |
|
Loading height in the vehicle, m, not less |
3,5 |
|
Diameter of a mill, mm |
700 |
|
Width of a mill, mm |
960 |
|
Drive of working body of a snowplow |
mechanical |
Overall dimensions
MTZ-82.1 |
MTZ-92P |
|
Overall dimensions in transport situation, mm, no more — length — width — height |
6000 2100 3300 |
5800 2100 3250 |
Weight is constructive, kg, no more |
4500 |
4400 |
Lump, kg, no more |
4700 |
4600 |