(View map)
- BrandKazstanex
- Country of manufactureRussia
The RUUK computer stand for car wheels with a diameter of disks from 12 to 22''.
-
-
- Sensors use infrared communication that does them more convenient in work.
- Protection against influence of background radiation is introduced.
- For an exception of a possibility of failure of cascades of interfaces of communication at the emergency situations caused by break of cables the circuit technical solutions providing reliable protection of these cascades are introduced.
- The software of the stand is added with the program "-a low spoiler" - allowing to take measurements on cars with low spoilers without use of special adapters.
-
| Technical characteristics: | |||||||||
|
Compensation of a beating of a disk |
±-5 ° - |
±-2' |
|||||||
|
Total convergence forward |
±-7 ° - |
±-2' |
|||||||
|
Total convergence back |
±-7 ° - |
±-2' |
|||||||
|
The convergence is separate forward |
±-3,5 ° - |
±-1' |
|||||||
|
The convergence is separate back |
±-3,5 ° - |
±-1' |
|||||||
|
Disorder is forward |
±-7 ° - |
±-3,5' |
|||||||
|
Disorder is back |
±-7 ° - |
±-3,5' |
|||||||
|
Longitudinal tilt angle of an axis of turn of wheels |
±-20 ° - |
±-8' |
|||||||
|
Cross tilt angle of an axis of turn of wheels |
±-20 ° - |
±-8' |
|||||||
|
Corner of shift of a forward axis |
±-3,5 ° - |
±-3' |
|||||||
|
Angle of the movement |
±-3,5 ° - |
±-3' |
|||||||
|
Maximum angle of rotation of wheels |
±-40 ° - |
±-30' |
|||||||
|
Difference of angles of rotation of wheels |
- |
±-30' |
|||||||
|
Corner of shift of a back axis |
±-3,5 ° - |
±-3' |
|||||||
-
| Technical characteristics: | |||||||||
|
Tension, In |
200... 240 |
||||||||
|
Frequency, Hz |
50/60 |
||||||||
|
Range of fastening of a wheel clip, inches |
10... 22 |
||||||||
|
Working temperature, ° - With |
+10... +35 |
||||||||
|
Power consumption, W |
250 |
||||||||
|
Weight, net, Kg, / gross, Kg |
155/216 |
||||||||
|
Loading capacity of platforms, Kg |
for 1500 |
||||||||
|
Time of continuous work, Hour |
48 |
||||||||
|
Overall dimensions, mm |
1100х600х1500 |
||||||||
-
-
| Technical characteristics: | |||||||||
|
Tension, In |
200... 240 |
||||||||
|
Frequency, Hz |
50/60 |
||||||||
|
Range of fastening of a wheel clip, inches |
10... 22 |
||||||||
|
Working temperature, ° - With |
+10... +35 |
||||||||
|
Power consumption, W |
250 |
||||||||
|
Weight, net, Kg, / gross, Kg |
155/216 |
||||||||
|
Loading capacity of platforms, Kg |
for 1500 |
||||||||
|
Time of continuous work, Hour |
48 |
||||||||
|
Overall dimensions, mm |
1100х600х1500 |
||||||||
-
