Products of other enterprises
Technical characteristics
- Country of manufactureTaiwan
Description
The tool for removal of external covers of a cable with a diameter from 10 to 30 mm. Allows to cut through covers up and down of a cable.
The knife for cutting of the optical SNR - STP - C3 cable - represents the folding compact easy - to - use, manual tool for removal of a cover of a fiber - optical cable.
Main features:
- Existence of the unidirectional ratchet mechanism intended for symmetric bilateral cutting of a cable unlike a pluzhkovy knife when which using two times cutting of a cable was required;
- SNR - STP - C3 is used for cutting of a cable with a diameter from 10 to 30 mm;
- It is equipped with two knives with the adjustable depth of promotion;
- For convenience of adjustment of knives there is a millimetric scale.
Operation and application:
- The STP - C3 case includes handles, brackets, regulators of the ratchet mechanism, an edge, scales of adjustment of edges directing cores, regulators of provision of an edge, tightening the mechanism and other elements;
- The regulator of setup of the ratchet mechanism can be rotated in any party.
Cutting process:
Cross cutting of a cover of a cable:
- Turn off the screw of the tightening mechanism and reveal him, establish edges in situation 0. Install regulators of the ratchet mechanism as shown in the scheme 2;
- Separate the left and right brackets of STP - C3, and then close them around a fiber - optical cable;
- Close tightening the mechanism and tighten its screw;
- Turn the handle of turn of an edge as shown in the scheme 1 on the right, rotating the regulator of provision of an edge, establish edges of edges on the necessary depth of incision and turn STP - C3, then again establish edges of edges on the necessary depth of incision, and again turn STP - C3 until the cover of a cable is cut;
- Establish edges in an initial position.
Longitudinal cutting of a cover of a cable:
- Turn off the screw of the tightening mechanism and reveal him, establish edges in situation 0. Install regulators of the ratchet mechanism as shown in the scheme 2;
- Separate the left and right brackets, and then close them around a fiber - optical cable;
- Close tightening the mechanism and tighten its screw, turn regulators of the ratchet mechanism so that they squeezed a surface of a fiber - optical cable;
Contact the seller
Stripper cable SNR-STP-C3