Superthin liquid thermal insulation of RE-THERM

Superthin liquid thermal insulation of RE-THERM is the covering created according to the latest achievements of scientific and technical progress. This structure already at a thickness of layer of 1 millimeter renders essential heat-insulating effect, by the efficiency comparable with application of a layer of classical thermal insulation 50 millimeters thick. In essence thermal insulation of RE-THERM represents paintwork material which after drawing on any surface (on a facade or an internal wall of the house, on a pipe, on the tank, etc.) forms the thinnest film (from 1 to 3 (mm)) capable to work as full-fledged thermal insulation,

Drawing superthin liquid thermal insulation of RE-THERM is carried out by means of standard painting tools, such as a brush, the roller, a spray, the pallet, etc. Ideally picked up components, the equipment and manufacturing techniques of a heat-insulating covering of RE-THERM allow to give it not only heat-insulating, but also waterproofing, and under certain conditions, and sound-proof properties. 
The heat-insulating polymeric covering of RE-THERM consists of the vacuumized ceramic microspheres (the size from 10 to 50 microns) and hollow silicone microspheres (diameter from 30 to 100 microns) which are in suspension in mix from polymeric binding, pigments, fire-retarding agents, softeners and other target additives. Such structure of heat-shielding coverings of RE-THERM does them by lungs, flexible, resistant to the UF radiation, impact of an atmospheric precipitation and differences of temperatures.

Superthin liquid heat insulators of RE-THERM possess is unique in low coefficient of heat conductivity which does these structures tens times more effective than "classical" heaters, and as a result, allows to reduce thickness of the used thermal insulation layer phenomenally. The highest resistance of RE-THERM to atmospheric actions allows to apply it without additional protection - without integumentary layer on pipelines and other metal surfaces and without the need for use of facing materials on the protecting designs. 
RE-THERM covering applied on a wall surface is not only highly effective heat-insulating material, but also the protective structure protecting a wall from negative impact of external factors.

Unlike standard thermal insulation superthin liquid thermal insulation of RE-THERM has practically no hydrophily. To that lack of moistening of wall designs and increase in term of their service is a consequence. 
The covering of RE-THERM is actively used on various objects several years and has broad practice of application. Experience of use of superthin liquid thermal insulation of RE-THERM says about what the objects warmed by it cost in steady-state condition already many years, and the people exploiting them forever forgot about the problems connected with insufficient warming, a namokaniye and mold defeats of building constructions. 
Besides other advantages, the superthin liquid heater of RE-THERM is fireproof material. These structures are issued in two versions – slabogoryuchy and nonflammable (depending on scopes and tasks). 
During creation of the materials our company always proceeds from this to create a product which will not do harm to the environment and liquid thermal insulation of RE-THERM did not become that an exception! RE-THERM coverings – environmentally friendly materials which use, storage and transportation are not connected with observance of special safety requirements. Use of RE-THERM does not do harm to the persons having with it direct contact the surrounding nature.

Speaking about branches and objects where it is possible to apply heat-shielding coverings of RE-THERM it is possible to tell safely that they are innumerable. Let's list only some of them: 
• Elimination of frost penetrations in walls, frost penetrations in balconies and overlappings. 
• Warming of slopes, warming of floors, warming of external and internal walls of buildings. 
• Elimination of condensate on walls and other protecting designs. 
• Thermal insulation of pipelines, processing equipment, tanks and shutoff valves. 
• Reduction of quantity or complete elimination of condensate on the metal surfaces of pipelines. 
• Thermal isolation of partitions and cases of vessels and other means of transport. 
• Decrease in injury risk of trudoprovod and equipment (elimination of a possibility of receiving burns of service personnel). 
• Warming of roofs, cellars, technical floors (garrets) and many other things. 
Summing up the result it should be noted the main advantages which RE-THERM coverings have: 
• Simplicity, convenience and high speed of works, connected with warming 
• Lack of need of the device of an integumentary layer on pipelines. 
• Lack of need of facing of a layer of thermal insulation on facades. 
• When warming the RE-THERM pipelines is an anticorrosive protection, thermal insulation, vapor barrier and an integumentary layer! 
• Possibility of constant control of a condition of a surface. 
• Does not create additional weight load of an object and does not increase the volume of the warmed object. 
• Has esthetic appearance and it is easily tinted in various colors. 
• High resistance practically to all external influences provides the highest durability not less than 15 years.