Appointment
Lamps explosion-proof figurative for glow lamps are intended for the general illumination of explosive zones according to explosion protection marking.
Features
-
Allows installation of glow lamps with a power up to 95 W
-
The convenient handle for transfer from place to place
-
Existence of the hook allowing to hang up the lamp on a pipe, a wall or other object.
-
The extra-strong plafond with high transparency bears blow of 4 J at a temperature of -60 °C and allows hit of a cold stream of water on the working lamp without loss of strength characteristics.
-
The button of inclusion/shutdown of the lamp located on the lamp case
-
Corrosion-resistant materials with a special covering provide long service life.
Light sources
-
glow lamp (L.NAK.) with power up to 95 W
-
compact luminescent energy saving lamp (ENSB.L.) with power up to 11 W
-
LED socle lamp (SD.L.) 5 W
Structure of a symbol
SVP – X2 X1 – X3
SVP – the lamp explosion-proof portable
X1 – type of the applied lamp
L.NAK. – glow lamp
ENSB.L. – compact luminescent energy saving lamp
SD.L. - LED socle lamp
X2 – the power of the lamp (W) used in the lamp: 5 Of W for SD.L., to 11 W for ENSB.L., to 95 W for l. NAC.
X3 – a type of a climatic modification and category of placement in accordance with GOST 15150:
UHL1 – for the lamp with glow lamps or LED socle lamps
U1 – for the lamp with luminescent lamps
TU 3461-012-00213569-2009
Example of record of designation of the lamp for the 95 W glow lamps, climatic modification and category of placement of UHL1. "SVP-L.NAK.95-UHL1 lamp"
Design
The lamp consists of the aluminum case with a powder covering.
-
Protective glass – heat-resistant, extra-strong, with high light-transmitting ability, fastens in an aluminum ring and is twisted in the lamp. The protective lattice is in addition applied to protection of glass.
-
To the case with a plafond the plastic hollow handle for transfer of a lamp in addition fastens.
-
In the handle the cartridge and terminal clips for power connection are established.
-
Leading of a cable is carried out through the cable input located on the handle.
-
In and outside of the lamp grounding bolts are established.
Technical characteristics
Explosion protection marking: |
2ExdeIICT4 for glow lamps with power up to 95 W; 2ExdellCT6 for a lyum.lampa |
Pylevlagozashchita level: | IP65 |
Boss's type | E27 |
Supply voltage: | 220B, 50 Hz |
Diameter of the brought cable: | The 10-14th |
Section of the connected veins: | 3kh (1-2,5mm ²) |
Class of protection against defeat by electric current | I |
Power factor | cos φ ≥ 0,95 |
Ambient temperature: - for luminescent lamps - for other lamps |
from -60 °C to +50 °C from -40 °C to +40 °C |