T-profile for porcelain tile 1,5mm

Accessories for porcelain tile are necessary materials which are intended for its high-quality laying. Here it is possible to carry not only various glue mixes, but also metal holders, and also the other elements necessary for repair. Any work connected with use of this material as facing has to be carried out only by experts. This moment is one of essential conditions of a guarantee which we as producers of porcelain tile provide for all term of its service making not less than 15-18 years.

You can always buy accessories for porcelain tile in our company

Accessories for porcelain tile allow you not only to quickly carry out necessary repair, but also to qualitatively make its laying. Such ways exists two: glue when the tile keeps within on in advance prepared ideally plain surface by means of glue, and also by means of the metal holders who are mounted in a wall. The first way assumes to use also special mix as a bulk floor as much as possible to level a surface. This way is most convenient though it is very simple. Laying by means of metal holders is applied, as a rule, when facing walls. At first these holders are mounted in a wall. After that on the back of a tile several not through openings by the number of such metal probes become, and then the tile is got on them. Such way allows to regulate laying and is very widespread.

Acquisition of accessories for porcelain tile has to be carried out in advance that process of a laying did not stop. Especially it concerns various glue mixes. The possibility of acquisition of such devices is actual since demand for porcelain tile grows daily. Its popularity is explained by properties which it gains thanks to specifics of process of production. So, at the first stage mix is formed of natural materials: remains of granite, mica, spar and mineral substances. This mix is enriched with moisture then is exposed to a powerful press thanks to which its structure becomes very dense. Besides that from structure is removed air, an air time on its surface is also eliminated. Such process does a keramogranitny tile very strong, and also waterproof. Then process of roasting in the furnace at a temperature of 1300 degrees Celsius follows. Mix is in it until the level of moisture does not fall lower than 0,5% of lump then porcelain tile is cooled and exposed to polishing. The last stage is not obligatory since at the exit from the furnace there is already a ready rough porcelain tile. It can remain also it, or is exposed to polishing.