Table for cleansing of newborn AIST-1
It is intended for accommodation of newborns on it when carrying out cleansing, survey, swaddling, measurement of growth and other procedures. The table is used in maternity homes, hospitals, institutes.
Framework table - folding, it is executed from steel pipes of rectangular section with drawing an environmentally friendly polymeric and powder covering steady in repeated processing by the disinfecting solutions applied in medicine.
The panel of a bed is manufactured of plastic, has rigid fastening on a basic frame of a framework of a table. Under the basis of the panel of a bed sliding regiments from a steel sheet with a polymeric and powder covering are placed.
The device of heating and lighting includes:
1. The infrared radiator (in number of 1 piece) provides hypodispersion of heat on a bed surface.
Bed surface temperature for accommodation of the newborn is regulated by the control unit only in the manual mode, in steps, change of power of heating. The deviation of average temperature in the center of a bed from the average temperature of a bed does not exceed 2 °C.
All elements of an infrared radiator are closed by the protective metal gauze.
2. The LED lamp (in number of 1 piece) provides illumination of a surface in the center of a bed - not less than 200 Lx.
The table is equipped with the light and sound alarm system of emergency operation. In the course of work, the control unit placed on vertical part of a rack carries out diagnostics of devices for safety of children, at the same time the following parameters are controlled:
- operability of the sensor of temperature
- a bed overheat (temperature increase to +40 °C)
- loss of tension in an electric network
- the category of batteries of the alarm system (the total voltage of batteries is less than 2,4 Volts)
The table is completed with the sensor which is placed in the center of a bed and shows the taken bed temperature on the indicator.
The mattress is made of polyurethane foam (thickness of 20 mm) with a cover from an oilcloth with a polyvinyl chloride covering on a fabric basis.
The basis is established on the 4th self-orientating wheels of "TENTE" (Germany), with a diameter of 75 mm, with an individual brake of each wheel.