Products of other enterprises
Description
Tape PIL in Taraz
The tape polyvinylchloride sticky - the rolled material received in the valtsekalandrovy way on the basis of the plasticized polyvinylchloride with addition sacred and thermostabilizers with drawing on one party of a glue layer which at rewind of 1 roll does not exfoliate and does not come over to other side of a tape. The tape is intended for protection against corrosion of an external surface of the main oil and gas pipelines at construction, repair, and also for a waterproofing of heat conductors. Recommendations about application: A temperature interval of operation of a tape from - 30 °C to + 30 °C. At air temperature below 10 °C it is necessary to sustain a tape not less than 48 hours at a temperature from 15 °C to 40 °C. The technical characteristic the Thickness Brand B Brand A, mm 0,20±0,05 0,30±0,05 0,40±0,05 Width, of mm 450±11 500±10 Tensile strength at stretching, MPa, not less than 17,5 15 Relative lengthening at a gap, %, not less than 190 170 Temperature of fragility, "With, is not higher than-30 - 30 Specific volume resistance at 20 °C, cm Ohm, on less than 1х1011 1х1011 Stickiness, with, not less, for thickness 0,20mm 20 10> 0,30 mm 25 15 Hygienic certificate No. 2.BTs.01.224.P.00106.02.03 of February 12, 2003 Tape PVH-L is intended for a winding of the main oil and gas pipelines as isolating and a sheeting. It is used at installation and repair of pipelines. The tape has no openings, bubbles, cracks, admissions of a glue layer on all the area and anguishes on edges. The glue layer at rewind of a roll does not exfoliate and does not come over to other side of a tape. Roll surface smooth. The tape made of polyvinylchloride composition by a valtsekalandrovaniye with drawing a glue layer on the one hand.
Contact the seller
Tape PIL in Taraz
We recommend to see