(View map)
- BrandKazstanex
- Country of manufactureBelarus
[Speed of giving of 400 mm / min-Automatic, the Mass of the machine is 500 kg]
ABM26S is developed for processing of an edge of a leaf from 10 mm to 35 mm thick. The car effectively and with high quality to process a leaf edge under corners in the range from 0º-to 60º-with smooth adjustment and facet wide up to 30 - mm (depends on a corner).
MAIN ADVANTAGES
Effective and high-quality processing of an edge under welding
Smooth adjustment of an angle of processing
High quality of processing
Processing in two directions
Elimination of crescent form of a leaf
Simple management
Technical characteristics: |
Tension | 230 - 50 - 50 - 60 - |
Leaf thickness | Mines 10 -–-Max. 35 - mm |
Leaf length | 200 - — - 3000 - |
Maximum weight of a leaf | 2000 - |
Fixing of a leaf | Mechanical |
Giving speed | 400 - Automatic |
Angles of processing | 0 - 60º-with smooth adjustment |
Max. width of a facet | 30 - |
Mass of the machine | 500 - |
Main switch | On/off |
Switch of the direction of the movement | Forward, STOP, Back |
Giving regulator | Change of size of giving |
Spindle | On/off |
-
Technical characteristics: |
Tension | 230 - 50 - 50 - 60 - |
Leaf thickness | Mines 10 -–-Max. 35 - mm |
Leaf length | 200 - — - 3000 - |
Maximum weight of a leaf | 2000 - |
Fixing of a leaf | Mechanical |
Giving speed | 400 - Automatic |
Angles of processing | 0 - 60º-with smooth adjustment |
Max. width of a facet | 30 - |
Mass of the machine | 500 - |
Main switch | On/off |
Switch of the direction of the movement | Forward, STOP, Back |
Giving regulator | Change of size of giving |
Spindle | On/off |
-
-
Main characteristics of the car:
Protection of the engine against an overload -
Automatic submission of the sheet -
Removal of a facet in both directions of the movement -
Smooth adjustment of a corner of a facet from 60 ° - to minus 60 ° - that excludes need to overturn a leaf -
The maximum width of a facet (depending on a corner) from 28 - to 35 - mm -
Various parameters of width of removal of a facet for various brands became also thickness of the processed leaf (to 35 - mm in a standard complete set or to 70 - mm in the expanded version) -
"J" - a facet profile is optionally available -
Fast adjustment -
Additional guides.
Smooth adjustment of an angle of processing of an edge
Fixing of a leaf in ABM-26S
-
- --
-
-