(View map)
- Country of manufactureKazakhstan
Max. length of preparation: 1300 mm Max. diameter of preparation: 200 mm Quantity of spindles: 8 pieces Weight: 1900 kg
Appointment:
Grinding of fine-molded products (rail-posts) with high efficiency in the automatic mode.
Samples of the processed products:
-
-
Machine device:
-
I. The fixed sample (template) on which tapes for longitudinal (concerning a preparation axis) grindings move.
-
II. Tapes for cross grinding (2 layers) with different granularity: 1st layer large granularity, 2nd layer small granularity. Tapes have an ostsillyation.
III. Tapes for longitudinal grinding (2 pieces) with hydrogiving.
-
-
The automatic grinder with hydraulic giving of longitudinal sanding belts. Tapes with longitudinal movement carry out grinding in hard-to-reach spots of preparation, at a difficult relief of preparation, copying its profile on a template (a ready sample) fixed on the machine. The hydraulic actuator of giving provides smooth, without breakthroughs movement of grinding knot.
Cross sanding belts have an ostsillyation – for ideal quality of grinding. The machine is equipped electronic PLC программатором for programming of optimum speed of processing on each site of preparation depending on a detail relief. Programs for each detail remain in memory – time for change-over of the machine is not required.
The system of automatic loading allows not to spend time for loading of details and to considerably increase productivity.
The machine is equipped with the revolving mechanism. The revolving mechanism works in the following sequence:
- The 1st preparation is automatically loaded
- The 2nd and the 3rd preparations are processed by two longitudinal tapes
- The 4th and 5th preparations are processed by 2 cross tapes (tapes have an ostsillyation)
- The 6th preparation is unloaded
Complete set:
- 2 longitudinal tapes with hydrogiving, 2 layers of cross sanding belts with different granularity. Ostsillyation of cross sanding belts.
- The mechanism of automatic loading of preparations by section to 120kh120mm
- Max. diameter of the processed preparation of 200 mm
- Max. length of preparation is 1300 mm
-
Technical characteristics: | |||||||||
Max. length of preparation, mm |
1300 |
||||||||
Max. diameter of preparation, mm |
200 |
||||||||
Max. diameter of preparation (automatic loading), mm |
120 |
||||||||
Quantity of spindles, piece |
8 |
||||||||
Power of the drive of rotation of preparations and revolving mechanism, kW |
3 |
||||||||
Power of hydrostation, kW |
2,25 |
||||||||
General power of the machine, kW |
6,5 |
||||||||
Dimensions, m |
3,5х1,6х2,1 |
||||||||
Weight, kg |
1900 |
-
-
Technical characteristics: | |||||||||
Max. length of preparation, mm |
1300 |
||||||||
Max. diameter of preparation, mm |
200 |
||||||||
Max. diameter of preparation (automatic loading), mm |
120 |
||||||||
Quantity of spindles, piece |
8 |
||||||||
Power of the drive of rotation of preparations and revolving mechanism, kW |
3 |
||||||||
Power of hydrostation, kW |
2,25 |
||||||||
General power of the machine, kW |
6,5 |
||||||||
Dimensions, m |
3,5х1,6х2,1 |
||||||||
Weight, kg |
1900 |
-
-
Complete set:
- 2 longitudinal tapes with hydrogiving, 2 layers of cross sanding belts with different granularity. Ostsillyation of cross sanding belts.
- The mechanism of automatic loading of preparations by section to 120kh120mm
- Max. diameter of the processed preparation of 200 mm
- Max. length of preparation is 1300 mm
-
--