- Country of manufactureChina
Description
SCOPE. In general - it is almost not limited. Any sphere of human activity where it is necessary to dose something - from car wash and a dosage of fertilizers
SCOPE.
In general - it is almost not limited. Any sphere of human activity where it is necessary to dose something - from car wash and a dosage of fertilizers before fire extinguishing and dispensing of sulfuric acid.
NOT batcher DEMANDS ELECTRICITY. It consists of 2 parts - a hydraulic pomp and the dosing part. The pomp is set in motion by the arriving water flow, and in turn, the dosing piston forces to work. That is - the speed of operation of the device depends on a stream of the arriving water. Parameters of dispensing remain INVARIABLE.
Preparation for work:
It is connected to system of water supply - for example, even by a usual hose, and the second hose is lowered in a barrel with auto chemical goods - and it already works.
Use pluses:
1. Maximum accuracy of dispensing. Having once set necessary parameters by means of the regulator in the lower part of the device, you forget about it for half a year - just prior to the beginning of the next season when it is necessary to change concentration or even chemistry.
2. As it was already specified - independence of the power supply network, so, decrease in expenses, lack of problems at shutdowns and differences of tension, a possibility of use even in the distance from communications.
3. Strict control over an expense - more unfair washerman will not be able to cast to "uncle Vasya" chemistry gram. You can establish Dazator indoors to whom access, or in a box under the lock is limited.
4. DECREASE in the EXPENSE of CHEMISTRY and water. Thanks to exact dispensing and lack of losses, the consumption is cut (on many supervision) to 50%!
5. Increase in capacity of a sink. Consider how many it is spent time for a recharge of a cylinder and all accompanying losses of time for all day (or per day if a sink round-the-clock) - now you are relieved of it.
6. Following from previous - if earlier for providing a continuous steam of cars you used services of 2 washermen - that one operator will be able to perform the same work now!
7. Tremendous reliability - the first time after installation you remember it, at least, only in a year.
8. Service life - several years. And this is true - the device is very hardy technically.
9. Maintainability. It is very easy in service, has a minimum of the wearing-out parts which are quickly replaced even with own forces.
10. Inexpensive spare parts.
11. Simplicity in installation and use. It is very indicative - if does not work, means. it is incorrectly connected. Something like "protection against the fool".
12. Has a number of options: for a dosage of viscous substances - an inlet hose of the increased diameter; for a dosage of especially aggressive substances - a lateral injector (for avoidance of contact of chemistry with details) and the case from special materials and so on.
13. 1 Batcher = several posts. Now there are sinks on which 4 posts are connected to one Batcher. Note: it depends on a water pressure in system, and also on activity of use.
14. Lack of a rust and mechanical impurity at the exit. In the Batcher only hi-tech precision details from best quality stainless steel are applied and strong composite materials and plasticity, unsurpassed purity of mix at the exit thereby is reached. It is confirmed by use the Batcher, for example, in pharmacology and medicine. Unlike cylinders which quickly begin to rust and wear out.
15. Fast payback. Device cost - is approximately equal to the cost of 2 cylinders. How often you change them?
16. Fast change of parameters of dispensing. Everything becomes very simply - in the bottom of the device there is a regulator, rotating which clockwise or in the opposite direction, the necessary percent of dispensing is reached.
17. Minimum technical requirements. It is only that pressure in system made from 0.5 to 5 necessary for its work. Also in order to avoid so-called hydroblow we strongly recommend to install pressure regulator in front of the device.
18. To the maximum to use the washing ability of chemistry, so - without formation of foam which reduces the washing ability increases a chemistry expense, and also interferes with penetration on light surface - one of catalysts of chemical reaction
