- Maximum load5 Ton
- Working radius180 m
The floor and ceiling crane is used in any field of activity where there is a problem of rise and transfer of freights at limited distance which is caused by characteristics of the most lifting device. For bigger stability and durability of a design, the bearing support fastens at the same time to a floor and a ceiling. Such design course allows to use an arrow which maximum departure can make 12 meters. Loading capacity of similar system directly depends on features of installation and thickness of the base of the building.
The crane floor and ceiling console can be completed with the manual and mechanical drive, working in the A2 and A4 modes according to ISO 4301/1. The working angle of rotation of the console does not exceed 180 degrees that is caused by feature of a design. It is possible to install additional limiters which will artificially reduce this indicator to the required indicators. Installation of a set of other versions of the additional equipment which allows to simplify operation of the crane is possible and to make it more effective. The main advantage of floor and ceiling cranes, in comparison with other similar types, is the increased stability that guarantees reliability of operation. Such crane can be installed only in rooms as it needs the lower and top support. Installation is made by means of special systems of fastening only in case of compliance of the bearing abilities of the building to requirements of the producer.