The machine for T-SF 161 softforming

APPOINTMENT:

The softforming, fair removal of sves and polishing is intended for a veneering of edges of in advance pro-thinned out slabby materials by various edging rolled films by method.

SCOPE:

Is ideally suited for application at the enterprises and in shops for an average and a large-lot production of office and kitchen furniture, furniture facades and table-tops.

SCHEME OF PROCESSING:

THE RECEIVED PRODUCTS:

DESIGN FEATURES:

 - - - - - - - - - - - - - - - - - - - - - - - - - - Giving of a zagotovkipodach of preparation is carried out by a chain with the rubberized boots which move on two guides, providing exact movement of preparation of rather processing knots. The drive of giving is carried out with the help the motor reducer. Speed of giving of the conveyor is regulated besstupenchato by the inverter from the control panel depending on material of the processed preparations and edging material.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - preliminary heating Nagrevobespechivatsya by two hair dryers. By means of hot air, edging material with the layer of dry glue applied on it for its secondary activation for the purpose of giving of kleyushchy properties and receiving high-quality gluing. Control of temperature of the heated air the handle on a hair dryer flange is possible.

 -

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - Gilyotinaotrezka of edging material is carried out after the end of pass of preparation through a tape drive table on command from the limit switch by means of guillotine scissors. Movement of a knife is provided with a pneumatic cylinder.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - Knot of a prikatyvaniye edging materialabokovy adjustable rollers from a wearproof ma-of a terial carry out bending under the corresponding corner and radius of edging material, and also its reliable prikatyvaniye (compression) on the set radius, providing high quality of gluing by method a softforming. Clamping rollers are sprung, and the effort of a clip can be regulated. Three profiles of rollers are included in the basic package.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the Milling uzelfrezerny support provides a possibility of movement of a spindle in the vertical and horizontal plane on cylindrical guides by means of screw couples for exact setup of copiers and a mill. The subpress of the lower and top copiers is carried out by springs. As support of a shaft of a spindle the high-precision bearings ensuring normal and durable functioning of knot with a high frequency of rotation of a shaft (11000 rpm) are used. High quality pieces of a sves of facing material is provided.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the Top and lower tsiklevochny nozhiprednaznachen for removal of surplus of the edging material pasted on the lower and (or) top edges of preparations. Control of scraping of edging material is exercised by means of the mechanical copiers having a possibility of adjustment. High quality of processing of edges is provided.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the Polishing uzelpolirovalny knot serves for cleaning of the processed part of an edge, giving of natural color and gloss to it. Convenient adjustment allows to adjust on any corner polishing circles concerning the processed detail edge.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - Komplektuyushchiyekomplektuyushchy products of the leading firms (SIMENS, OMRON, etc.) ensure reliable, no-failure and durable operation of electric part, and also all machine in general. Electrocase and control panel