The nozzle cleared Noxide/stainless steel, 10/24'' 0,20 mm (EC130209)
- Customer pickup,
- Courier
- In detail
- BrandTecnoCooling
- Country of manufactureGermany
The nozzle is a mechanical spray of water (or solution, in case of chemical additives). Models of nozzles TecnoCooling are classified by the following signs for systems:
- Constructive (existence of the anti-drop valve and filter)
2 Diameter of an exhaust outlet (range: 0,15 ~ 0,20 ~ 0,30 ~ 0,40 ~ 0,50 ~ 0,60 ~ 0,80 ~ 1,00)
3. Nozzle material (brass, stainless steel)
4. Diameter of a carving of fastening in the nurse (10/24UNC/2A - most used, 1/8 UNC)
Principle of work:
The pump of high pressure passes water through specially developed nozzles, creating a water veil from the smallest drops of water which average size does not exceed 10 microns. These drops quickly absorb heat from the environment and turn into gas, at the same time without moistening surfaces and objects. The energy (warmly) used for transfer of water to gaseous state is removed from the environment, cooling air. Results impress: low costs of installation and ensuring work of system, instant effect, a possibility of use in the closed and half-open rooms, and also in the open air. Also maintenance of system of fogging of TecnoCooling do not demand big expenses.
Some models of nozzles have the antidrop valve. The antidrop valve of a nozzle consists of the calibrated spring and a ball. At increase in pressure the valve opens and passes water to a working opening of a nozzle for giving of fog, at pressure decrease is closed, allowing to avoid formation of drops.
Characteristics:
The main case from the nickelized brass
Working head from stainless steel
It is possible to wash out in weak acid solutions
Sealant from ethylene-propilenovogo of rubber (EPDM)
Carving 10/24" UNC
Water consumption at 70 bars – 4,72 l/h
Producer: TecnoCooling (Italy)
Guarantee: 2 years.