Products of other enterprises
Technical characteristics
- BrandKassenovaip
- Country of manufactureKazakhstan
Description
The plug soldering in PE-100 SDR of 11 d-63
The plug under a flange polyethylene is used to connection of the polyethylene pipeline to steel to a pipe, and also the locking or regulating fittings, by means of flange connection.
The plug under a flange from polyethylene is made on all modern norms and standards of PND polyethylene of low pressure on the hi-tech equipment by molding with the subsequent machining.
Polyethylene of the PE 80 and PE 100 quality brands is applied to production of this detail. Thanks to this material, the plug possess excellent chemical and physical characteristics that provides wide scope and long service life of knots, with use of plugs under a flange.
The principle of use of this fitting consists in providing an emphasis for the flange which is put on the plug and excluding a possibility of separation of knot during its operation. Use the plug under a flange in places of transition of the polyethylene pipeline on a latch or a steel pipe, in the presence on it a counterflange.
The plug under a flange is used together with a clamping flange which has to have wider internal diameter, than a usual standard flange. Need for boring of internal part of a flange, consists available the strengthening expansion of polyethylene part of the plug at the basis of a burt, preventing to adjoin densely to a flange to clamping part.
After installation of the plug on a pipe, by means of a steel flange and bolts with nuts, the pipe joins a latch, and burt on the plug does not allow a flange to come off at operation of the pipeline with working and maximum pressure.
The plug under a flange is issued the sizes 25, 32, 40, 50, 63, 75, 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315, 355, 400, 450, 500, 560, 630, 710 of mm and is used at installation of polyethylene pipelines transporting water, including drinking, corresponding GOST 18599-2001 to which any liquids polyethylene is chemically resistant.
The plug under a flange polyethylene is used to connection of the polyethylene pipeline to steel to a pipe, and also the locking or regulating fittings, by means of flange connection.
The plug under a flange from polyethylene is made on all modern norms and standards of PND polyethylene of low pressure on the hi-tech equipment by molding with the subsequent machining.
Polyethylene of the PE 80 and PE 100 quality brands is applied to production of this detail. Thanks to this material, the plug possess excellent chemical and physical characteristics that provides wide scope and long service life of knots, with use of plugs under a flange.
The principle of use of this fitting consists in providing an emphasis for the flange which is put on the plug and excluding a possibility of separation of knot during its operation. Use the plug under a flange in places of transition of the polyethylene pipeline on a latch or a steel pipe, in the presence on it a counterflange.
The plug under a flange is used together with a clamping flange which has to have wider internal diameter, than a usual standard flange. Need for boring of internal part of a flange, consists available the strengthening expansion of polyethylene part of the plug at the basis of a burt, preventing to adjoin densely to a flange to clamping part.
After installation of the plug on a pipe, by means of a steel flange and bolts with nuts, the pipe joins a latch, and burt on the plug does not allow a flange to come off at operation of the pipeline with working and maximum pressure.
The plug under a flange is issued the sizes 25, 32, 40, 50, 63, 75, 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315, 355, 400, 450, 500, 560, 630, 710 of mm and is used at installation of polyethylene pipelines transporting water, including drinking, corresponding GOST 18599-2001 to which any liquids polyethylene is chemically resistant.
Contact the seller
The plug soldering in PE-100 SDR of 11 d-63
We recommend to see