The semi-automatic drilling and additive FL machine – 4L PLUS

The semi-automatic drilling and additive FL machine – 4L PLUS
Quantity of supports: 4 pieces, Total of spindles: 86 pieces.

APPOINTMENT:

The drilling and additive machine of type through passage is intended for drilling for one pass of through and deaf openings under shkant, a coupler core in end faces of details and openings under accessories in layer in details of cabinet furniture. Work of the machine is carried out in the semi-automatic mode.

SCHEME OF PROCESSING:

TWO OPTIONS OF THE ARRANGEMENT OF SUPPORTS:

Fig. 1 Vertical arrangement of an extreme right support.

Fig. 2 Horizontal arrangement of an extreme right support.

SCOPE:

It is applied to processing of necessary assembly openings in details of cabinet furniture at the enterprises and in shops on a large-lot production of furniture, and also other woodworking productions.

SECURITY SYSTEM

All knots and units meet standards of SE. On all moving knots and mechanisms protective protections for prevention of traumatism are established.

 -

DESIGN FEATURES

 - - - - - - - - - - - - - - - - - - - - - - - - - - the EXTREME RIGHT SUPPORT the Extreme right head can work both in vertical, and in horizontal position. It allows to process the majority of cards of additives for one pass.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - ELECTRONIC DIGITAL SENSORS of Movement of vertical drilling supports with an accuracy of counting of the size of 0,1 mm from leading company of "SIKO" provide high precision of the established sizes at control on width and, respectively, high precision of processing, reduction of time of readjustment and convenience of service.

 -

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - DRILLING SUPPORTS Can quickly and precisely be recustomized by situation depending on the card of additive, and also have function of turn on 90? with pneumofixing. Thanks to quantity of drilling supports and their fast change-over the machine of type through passage is easily built in the technological line and, respectively, to be applied at the enterprises with a mass production.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the PNEUMOBRAKE the pneumobrake Established on supports provides their uniform movement, excludes a distortion of a drilling support and promotes exact positioning.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the PANEL of PANEL UPRAVLENIYAOTLICHAYETSYA also provides with ergonomics convenience of work and setup of the machine. Work on the machine does not demand from the operator of high qualification.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - FAST CONTROL of DEPTH of DRILLING the Convenient device for fast control of depth of drilling. By means of a special scale the maximum course of a drilling head in the horizontal or vertical direction is exposed.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - INDUSTRIAL CONTROLLERS the Control of the machine is carried out at the expense of controllers of production "Siemens". All electronic components are collected in the uniform protected block placed in the machine.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - MOVEMENT of SUPPORTS Is carried out on the high-precision served prismatic guides that provides the highest accuracy of positioning.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the BLOCK of PREPARATION of AIR Is carried out adjustment of pressure in a pneumatic system. Onto level of pressure it is controlled on manometers.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - PNEUMATIC DISTRIBUTORS Control of distribution of pressure in a pneumatic system of the machine is carried out by pneumatic distributors from the leading producer "NassMagnet" (Germany).

 -

 - - -

Technical characteristics
The sizes of the processed details, mm: - - - width, the smallest - - - length, the greatest - - - thickness, the greatest	90 2500 80
The maximum distance between vertical heads, mm	845
Depth of vertical drilling, the greatest, mm	70
Depth of horizontal drilling, the greatest, mm	40
Quantity of drilling supports, piece: - - - horizontal - - - vertical	1/2 4/5
Quantity of spindles on supports, piece, - - - horizontal - - - vertical	21 11
Total of vertical spindles, piece.	44/65
Total of spindles, piece.	86
Distance between centers spindles, mm	32
Frequency of rotation of drilling spindles, rpm	2828
Power of the electric motor of a vertical spindle, kW	1,3
Power of the electric motor of a horizontal spindle, kW	1, 5
Overall dimensions, mm	3460х2835х1460
Weight, kg	1800

 -

 - - - -

Technical characteristics
The sizes of the processed details, mm: - - - width, the smallest - - - length, the greatest - - - thickness, the greatest	90 2500 80
The maximum distance between vertical heads, mm	845
Depth of vertical drilling, the greatest, mm	70
Depth of horizontal drilling, the greatest, mm	40
Quantity of drilling supports, piece: - - - horizontal - - - vertical	1/2 4/5
Quantity of spindles on supports, piece, - - - horizontal - - - vertical	21 11
Total of vertical spindles, piece.	44/65
Total of spindles, piece.	86
Distance between centers spindles, mm	32
Frequency of rotation of drilling spindles, rpm	2828
Power of the electric motor of a vertical spindle, kW	1,3
Power of the electric motor of a horizontal spindle, kW	1, 5
Overall dimensions, mm	3460х2835х1460
Weight, kg	1800

 -

 -

 -