(View map)
- BrandKazstanex
- Country of manufactureKazakhstan
Groove width: 40-220 mm groove Depth: to 60 mm Kickoff of a groove at an angle: 45, 60, 90 degrees milling cutter Power: 1,8 kW
APPOINTMENT:
The offered device is intended for milling of castle grooves on the pro-thinned-out bar in the conditions of a building site or in stationary shop conditions. Is exposed to processing both glued, and a bar from the massif. The device allows to receive high-quality castle connections with sufficient productivity for co-perpendicular walls and partitions. With the help "-Erkerny" - devices production of erkerny connections at an angle the 45th hail is carried out.
SCOPE:
It is applied in wooden housing construction.
PRINCIPLE OF ACTION:
The frame with the milling car is established in a vice bases which fastens directly on the processed bar in a zone of an arrangement of future groove. The frame with a milling cutter can move in the cross direction on the device basis. Set of movements of a milling cutter in the longitudinal and cross directions allow to make a groove of necessary width and depth. "-Erkernoye" - the device represents the special mobile basis - a vice having the required angular groove in the right place of a bar and providing use of the top frame with a milling cutter of the main set for exact execution of the right or left corner the 45th hail. In a design "-erkerny" - devices there is a mechanism of an exact adjustment of corners the 45th hail.
BASIC COMPLETE SET OF THE MACHINE:
- The top frame with the milling car.
- The lower basis - a vice for formation of mutually perpendicular wall locks.
- Mill with a spare set of hard-alloy knives.
- "-Erkernoye" - the device.
-
SAMPLES OF THE RECEIVED PRODUCTS
-
DESIGN FEATURES
-
IN THE DEVICE AS WORKING BODY THE MANUAL ELECTRIC MILLING CUTTER OF FIRM "-MAKITA" IS USED -
-
SPECIALLY DEVELOPED CYLINDRICAL TRAILER MILL WITH A DIAMETER OF 35 OR 40 MM.
-
SPECIAL Ramaspetsialnaya the frame allows to move a milling cutter in the longitudinal direction at a size of width of the lock or thickness of a bar and has for this purpose the special adjusting device.
-
The DEVICE of RISE AND Frezeraustroystvo's LOWERING allows to set the necessary depth of milling of a castle groove.
-
-
Technical characteristics: | |||||||||
Thickness of the processed bar, mm |
35-165 (210) |
||||||||
Depth of a groove, mm |
to 50 |
||||||||
Engine capacity, kW |
1,8 |
||||||||
Diameter of a mill, mm |
35, 40 |
||||||||
Corner "-Erkerny" - connections, a hail |
+/-45 |
-
-
Technical characteristics: | |||||||||
Thickness of the processed bar, mm |
35-165 (210) |
||||||||
Depth of a groove, mm |
to 50 |
||||||||
Engine capacity, kW |
1,8 |
||||||||
Diameter of a mill, mm |
35, 40 |
||||||||
Corner "-Erkerny" - connections, a hail |
+/-45 |
-
-
-
-