Seller
Kazakhstan, Almaty
(View map)
(View map)
+7(7
Display phones
13
13 years on Allbiz
Quickly responds
Technical characteristics
- Country of manufactureKorea
Description
The vertical turning processing Puma VAW 700/800 centers
[The maximum length of processing is 440 mm, the Maximum O processings of 711 mm]
Basic complete set
[The maximum length of processing is 440 mm, the Maximum O processings of 711 mm]
The vertical turning centers with automatic change of cartridges (spindles) for processing of automobile rims. The centers of the Puma VAW series have system of giving SOZH of the increased productivity, providing effective washout of shaving and a special design for full turning of disks on one machine. The modern vertical turning center with the 12th position capstan and with the ChPU Fanuc 32i-A system is created for processing of large details on the raised modes at long preservation of accuracy and at the minimum occupied floor space.
Technical characteristics: | |||||||||
- | PUMA VAW700 | PUMA VAW800 | |||||||
Possibilities of processing | |||||||||
Maximum size of a detail (mm) | 330 | 440 | |||||||
Maximum diameter of processing (mm) | 673 | 711 | |||||||
Capstan | |||||||||
The tool sizes for turning of the outer diameter (mm) | 25 | 25 | |||||||
Diameter of a boring mandrel (borshtanga) (mm) | 50 | 50 | |||||||
Number of tool positions (piece) | 12 | 12 | |||||||
Main spindle | |||||||||
Speed of a spindle (rpm) | 2,000 | 2,000 | |||||||
Carriage | |||||||||
Length of movements on axis X (mm) | 570/570 | 570/570 | |||||||
Length of movements on axis Z (mm) | 550/550 | 650/650 | |||||||
The accelerated movements on axis X (m/min) | 16 | 16 | |||||||
The accelerated movements on axis Z (m/min) | 16 | 16 |
Technical characteristics: | |||||||||
- | PUMA VAW700 | PUMA VAW800 | |||||||
Possibilities of processing | |||||||||
Maximum size of a detail (mm) | 330 | 440 | |||||||
Maximum diameter of processing (mm) | 673 | 711 | |||||||
Capstan | |||||||||
The tool sizes for turning of the outer diameter (mm) | 25 | 25 | |||||||
Diameter of a boring mandrel (borshtanga) (mm) | 50 | 50 | |||||||
Number of tool positions (piece) | 12 | 12 | |||||||
Main spindle | |||||||||
Speed of a spindle (rpm) | 2,000 | 2,000 | |||||||
Carriage | |||||||||
Length of movements on axis X (mm) | 570/570 | 570/570 | |||||||
Length of movements on axis Z (mm) | 550/550 | 650/650 | |||||||
The accelerated movements on axis X (m/min) | 16 | 16 | |||||||
The accelerated movements on axis Z (m/min) | 16 | 16 |
- Device automatic changes of cartridges (spindles)
- Blocking of a forward door of a protective protection
- System of giving SOZH with the pallet for shaving
- Full protection against spraying SOZH and shaving scattering
- Set of the manual tool (including the small tool for service)
- The leveling screws and plates
- Guide to work and service of the machine
- The warning plates according to safety measures
- Illumination of a working zone
- Standard set of tool holders
- The device of the centralized greasing
- Special cartridges and sets of cams to them
- The motor of a spindle of the increased power
- In addition holders of tools
- Devices of cleaning of a working zone and preparations
- Systems of giving SOZH under a high pressure
- Systems of active control and dimensional binding of the tool
- Systems of sduv / washout / removal / transportation of shaving -
- System of removal of oil fog
- Built-in graphic editor
- Monitoring of load of the tool
- ChPU system options
- Different types of systems of automatic giving of preparations
- Integration in automatic transfer lines, GPS
- Robotic loading / unloading
- Program options
Similar company products
Contact the seller
The vertical turning processing Puma VAW 700/800 centers