- BrandEurotire
- Country of manufactureUnited States
- ConditionNew
- Type of special machineryуточнять
We carry out direct deliveries of our production to any country of the world and we support an extensive network of regional representations for expeditious service of our clients.
CHARACTERISTICS OF PRODUCTION
- The big spot of contact allows to distribute pressure upon a basic surface evenly.
- Not directed protector drawing for increase in controllability and stability during the movement.
- The metal cord of the radial tire provides resistance to surplus loads and crash-worthiness.
- Steel breker: excellent protection against cuts, punctures and mechanical damages.
TECHNICAL CHARACTERISTICS OF PRODUCTION
| Tire standard size | 24.00R35 |
| The flange rim/height size (in inches) | 35x17.00/3.5 |
| Norm of a sloynost | 2 * |
| Protector drawing | ETRAC |
| TRA code | E4 |
| Loading/speed index | 209/B |
| Internal pressure (bar/kPa/pound per square inch) | 7/700/102 |
| Weight of the tire (kg/pounds) | 850/1874 |
| TKVCH/TMVCH | 357/245 |
| Rated load on the tire (kg/pounds) | 18500/40786 |
| Outer diameter (mm/inch) | 2170/85.4 |
| Tire radius under static loading (mm/inches) | 997/39.3 |
| Protector drawing depth (mm / 32 nds) | 67/84 |
| The minimum gap between dual tires (mm/inch) | 795/31.3 |
| Sealing ring | 335T |
| The maximum speed (km/h/mile an hour) | 50/30 |
| Structure | T-3, T-5, T-7 |
| Quantity of turns on km/mile | 394/245 |
| Full width (mm/inch) | 648/25.5 |
| Tire width under static loading (mm/inches) | 722/28.4 |
The above-stated values of pressure of inflating in cold tires are based on the maximum loading capacity of the tire of this design at the maximum speed of the movement of 30 miles/h (48 km/h) and distances of a running cycle to 2,5 miles (4 km). The values published here of pressure can be put not by the most optimum for real service conditions. Surely contact your representative of Eurotire for obtaining the recommendation of optimum norm of pressure in tires for your specific objectives. All values of pressure of inflating in cold tires calculate according to the guide to technical calculations of the maximum loading capacity of tires of a certain size, a sloynost and a class from the American association of standards for tires and obodyev (TRA) and the European technical organization for tires and rims (ETRTO).
