Two - saw edger SK - 050 - 11 kW
The purpose of the edge trimmer is to cut unedged boards and obtain finished cleanly edged material. The cutting of the workpiece is carried out in the longitudinal direction.
The purpose of the edge trimmer is to cut unedged boards and obtain finished cleanly edged material. The cutting of the workpiece is carried out in the longitudinal direction. With the help of this machine, it is possible to obtain a bar, a rail, a wagon blank, a pallet blank, etc. from a slab.
When choosing edge trimming equipment, it is necessary to consider the following technical characteristics:
- the maximum size of the processed workpiece;
- the number of saws that can be installed;
- maximum distance between the edge saws;
- installed power;
- raw material feed rate.
On two - saw edge trimmers, one saw is stationary, due to installation on a special spindle. The second saw is movable, which allows you to adjust the distance between the saws and get the required width of the finished product.
Workpiece dimensions
|
800 - 6500 up to 450 10 - 80 |
Circular saw diameter, mm | 500 (2 pcs) |
Installed capacity | 11 kW |
Saw frame clearance, mm | 120 |
The greatest distance between saws, mm | 400 |
The smallest distance between saws, mm | fifty |
Rotation frequency of saw blades, rpm | 3000 |
Overall dimensions of the three - saw machine
|
8400 1320 1450 |
Weight, kg | 500 |
At the request of the customer, it is possible to change the following parameters of the machine:
Circular saw diameter, mm | 450 (2 pcs) |
Installed capacity | 11 kW |
Saw frame clearance, mm | 100 |