INSTRUCTIONS FOR APPLICATION

Preparation of a surface: The surface should not be frozen or covered with hoarfrost, has to be the standing water released from. Remove dust, agnails and the polluted places. Remove a rust from all metal details. Fill with cement mortar of a crack and the rough raw surfaces. Condition the absorbing surfaces, cement surfaces or waters, unprotected from pressure, Abizol R primer (do not use primers on the basis of water), let's a primer dry.

During repair of an old roofing covering: clean loose details of roofing material and other pollution, swellings and cambers crosswisely cut and stick together with the help of Abizol KL DM glue. Fill cracks with bituminous and rubber Abizol G mastic.

Application: Use in a cold state. You apply mastic by means of a roofing brush, a maklavitsa. Impose the following layer after the first dries.

Gluing of RKM to the basis and among themselves: distribute glue completely on a surface width of stripsy RKM. Wait 15-20 min., impose the sheet of roofing material and strongly press.

Creation of waterproofing coverings: after the primer dries, carefully put 2-3 layers of mastic (each layer after drying previous), using 1,5 kg/m ² on one layer. You put the following layer across previous in order to avoid gaps in insulating covering. The general consumption of mastic makes 3,0-4,5 kg/m ². Check thickness of layers, monitoring the consumption of materials.

Note: Do not use in rooms. Contains organic solvent - it is impossible to use together with expanded polystyrene.

Clarification: Clear by means of white spirit, varnish gasoline or other organic solvent.

· TYTAN PROFESSIONAL Abizol KL DM Mastic of cold application for roofing material, is intended for gluing of rolled roofing materials and for creation of waterproofing coverings of easy type. Works even at slightly humidified surfaces. She creates a covering which is strong pasted to the lower layer and is steady against water, weak acids, the bases and strong components, being in the earth.

ADVANTAGES

ðработает on easily humidified surfaces

ðкрепко is pasted to the lower layer

ðпокрытие steady against water, weak acids, the bases and strong components, being in the earth.

USUAL APPLICATION

- gluing of rolled roofing materials to various bases

- skleivayeniye of layers of roofing material among themselves

- creation of waterproofing coverings of easy type