- Country of manufactureRussia
- PurposeFor furniture
Detailed description and appointment: The varnish of NTs-218 is used for finishing of the products made of wood in finishing furniture works, with the subsequent polishing or without it since the varnish forms a glossy covering. For increase in luster it is recommended to polish a varnish film by means of polishing structure. Also the varnish can be applied on various surfaces made on the basis of wood (e.g. to a chipboard, DVP, MDF). The products varnished NTs-218 are operated indoors. The varnish is applied as an independent covering, and in a complex with primers NTs-0135, NTs-0205, GF-032, GF-0119, PF-020, PF-0142. Properties of material, technical characteristics: The varnish of NTs-218 belongs to restrictedly weatherproof materials. The products varnished can be operated as indoors, and under a canopy and in not heated and heated rooms in zones with a temperate and frigid climate. The varnish represents transparent, uniform, almost colourless solution and has excellent spreadability and a fast penogasheniye. Possesses good adhesive properties, forms a film with the high level of decorative and protective properties, such as sacred and heat resistance, resistance to static influence of water. A covering NTs-218 steadily to change of temperature from minus 12 ° C to + 60 °C is delicious. To working viscosity the varnish is diluted with a thinner of RML or solvent 646, it is convenient in drawing (dispersion, filling, a brush or a tampon), quickly dries. It is applied on the prepared surface without priming or on the grounded surface, at the same time the varnish expense is considerably reduced. Color and appearance of a covering: After drying the varnish forms the glossy, equal, transparent, uniform covering without bubbles and mechanical inclusions which is not veiling texture of wood. Preparation of material for drawing: Before application, the varnish of NTs-218 is diluted to working viscosity with RML thinner, at pneumatic dispersion dilution is allowed by solvent 646. Solvent: RML thinner, solvent 646 Putting Material NTs-218: The varnish of NTs-218 is applied on a surface of products with method of pneumatic dispersion, in bulk, a brush or a tampon (on technology of drawing furniture combines). The varnish should be put with a thin, uniform layer, without potek. Without primer the varnish is put in two-four layers. Expense on one layer: The expense on a single-layer covering of a varnish makes 100-120 g/m2. Thickness of one layer Thickness of a single-layer covering a varnish makes 20-25 microns. Thickness of a film of a multilayered covering makes 120-150 microns. Drying of a surface: Duration of drying of a varnish at a temperature (20±2) °C - 0,75 h. At a multilayered covering a varnish dry at a temperature (20±2) °C with interlaminar drying during 1 h; final drying - during 36 h or at a temperature (50±2) of °C during 4 h. Covering service life: A covering NTs-218 steadily to change of temperature from minus 12 ° C to + 60 °C is delicious.
Contact the seller
Varnish furniture NTs-218 of GOST 4976-83 glossy