Warming of the base

First of all professional builders seek to achieve that that base of the building it was strong and durable since the base will assume the maximum load of all massif of future construction. The maximum value of durability of concrete of the base is reached after its reinforcing and nearly 30 day sediment after filling. For protection of the base against cracks a provodyatgidroizolyation and warming of the base of Almaty.Protective measures such are capable to prolong design service life for tens, and, sometimes, and on hundreds of years, having kept all properties of qualitative concrete.

Today warming of the base of Almaty can be carried out, having pasted over or having imposed new and any old base with tiled heaters where moisture protective function will be undertaken by glue like bitumen, and a plate like polyfoam, a penoizola will act as heat insulators. The cost and labor costs in such cases will be not small, at the same time probability of mechanical damage, sometimes as a result of process of an instillation, is extremely big. Besides seams in similar thermal insulation - inevitable reality. Unlike the mentioned technologies technology of a dusting, as well as its attributes - materials polyurethane foam and polyurea - are deprived of similar shortcomings.

You will find detailed information on features, ways of production of these materials on our website, in appropriate sections. Here we will tell in more detail about what waterproofing and warming of the base of Almaty from polyurea and polyurethane foam what properties will be given to the base by use of these coverings and why the choice should be stopped on these special materials.

Polyurethane foam and polyurea. Features and specifics.

These materials are the two-component connections possessing excellent characteristics both for warming of the base, and for its waterproofing. Considering warming of the base of Almaty also pay attention to the following factors:

• Similar protection of a basis of your house will be entrusted the high quality specialists of our company trained in the effective handling of the expensive professional equipment, applied in similar operations. Agree that this factor tells a lot of things as about our company, and the services rendered by us.
• Elements of which consist polyurea and penopoliuretanproizvoditsya at the advanced foreign enterprises and have small term between date of production and date of use - only three months. It guarantees that the heater offered by us - always "fresh"!

Polyurethane foam and polyurea. Properties of the base as a result of processing.

• Warming of the base of Almaty increases firmness and increases total period of service of material as its covering PPU seamless.
• Moisture and dampness do not influence concrete (in particular for polyurea).
• Repeatedly operational costs on care of the base and restoration of walls of the building decrease.
• Due to external "reinforcing" the base receives not only additional elasticity, but also additional resistance to loadings and physical impacts, and in case of a primeneniyapolimochevina - as well to influence of chemicals.
• The durability and the improved properties of the base, obrabotannogopenopoliuretany and polyurea are much less subject to negative impact of high and low temperatures (as well as sharp difference of temperatures in general).

Advantages of a dusting of polyurethane foam or polyurea.

Besides the high speed of a dusting (about 200 sq.m. for one change) the advantage of materials is the increased polymerization speed (only 10-15 seconds). It allows to continue works on construction and repair of the room on the same day! Putting a heater layer-by-layer, we close up the smallest chips and cracks, roughnesses and cambers, covering a concrete surface with a seamless cloth with magnificent adhesion (adhesion with a surface). All works on warming of the base of Almaty are performed by professionals, faultless quality of works is confirmed with our guarantee certificates.