Description of the welding car:
Diameters of the welded pipes of the welding car: D 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 125 mm, 140 mm, 160 mm.
The centralizer is four-tightening. Consists of the strengthened bed on which two mobile clips (160 mm) which are set in motion by two hydraulic cylinders and two motionless clips (160 mm) fasten. For connection to an electric maslostantion the centralizer is supplied with 2 tight quick disconnect connections.
Maslostantion electric with the control unit. It is intended for implementation of process of pressure of welding and cooling, reduces and parts clips. It is equipped: the manometer, pressure regulator, the three-position joystick, sleeves of high pressure with tight quick disconnect connections-2 of piece for connection to a centralizer. Range of pressure of a hydraulic system from 0 to 60 Bars, 220 B/0,75 kW.
Tortsevatel. Highly reliable landing of tortsuyushchy disks at the expense of system of fastening on device shaft for avoiding of casual movements to operating time, removal of shaving outside,
220 B/0,95 kW.
Heating element. It is equipped with the temperature regulator providing maintenance of the set temperature; an antiprigarny covering of working surfaces, a connecting cable and the network plug, the switch "it is included/is switched off", temperature is regulated from 180-230ºС,
220 V / 1 kW.
Boxing. For storage and transportation of a heating element and the tortsuyushchy device.
Set of inserts. One set of diameter consists of 8 half rings.
Clip for plugs under a flange. For welding on the center and the correct orientation of flanges.
CNC protocolour. For control of parameters of welding, memory of 1300 protocols can be used by welding cars with the electrohydraulic drive.
Set ZIP. Wrench, screw-driver.
Set of documents. Technical data sheet, operation manual (norm of the technological mode of process of welding of pipes of polyethylene), warranty card, packing list, certificate on quality.
Dimensions and weight. The car in a complete set of "M" and "ME" is packed into 2 places. The volume of transport packing is 0,96 m3 with a gross weight from 175 kg. The complete set "Э" is packed into 3 places of 1,35 m3 with a gross weight from 220 kg. The recommended power of the generator of 3,8 kW.
1. The centralizer is four-tightening
2. Electric maslostantion
3. Tortsevatel with the electric drive
4. Heating element
6. Set of inserts: 40,50,63,75,90,110,125,140 mm 7. A clip for plugs under d flange the 40-160th
8. Set ZIP
9. Set of documents